[All of the community chat is now on Discord!]

Join us on Discord Chat!


Join us on Discord Chat!


All of the community chat is now on Discord!

--------------------------------------------
http://PNWBemani.net/discord
--------------------------------------------

Join us on Discord Chat!


Join us on Discord Chat!

[Welcome, guest! Join our community today!]

Welcome, guest! Join our community today!

[FuryRising]

Ok, so me and my brother recently wanted to get back into playing DDR, we've been playing at arcades for years and stopped until recently.

But my brother found our cobalt flux in the garage. But the problem was, there was no control box with it! So we didn't think anything of it. We even cleaned the Cobalt flux to it looks brand new.

We went on a site and bought an off-brand control box(from DDRGame) and to no avail, it didn't work, the wiring must have been different. We saw the DIY guide, but that one is for PC and we want PS2, so my inquiry is, is there a guide to making one for PS2 or maybe does someone have an extra control box they are willing to sell to us? Or maybe someone can tell me if doing the PC control box and putting a USB to PS2 converter would work, any answers would be appreciated!

Thanks guys, it means a lot!

[Suko]

The process should be EXACTLY the same as described here:
http://www.pnwbemani.net/bemani-discussion/building-a-diy-cobalt-flux-control-box/

If you grab any generic PS2 controller or DDR mat, you could wire it up to work with your CF using this guide. If you don't want to get your own hands dirty, then I suggest going to the marketplace forums on Zenius-I-Vanisher, Aaronin.jp and BemaniStyle.com and asking for a CF control box there. I don't think you're going to get one for very cheap, but you never know.